This airsoft rifle is great for the beginner. Very close in form and
function to the real steel 16-A4, this inexpensive airsoft rifle will
provide hours of enjoyment. This version features an extendable stock,
LED illuminator and laser sight. With this M-16A4 replica, the
admiration continues in the sports realm of AirSoft. Comes complete with
safety goggles, rifle strap and 100 bbs.
Reviews :
I've had this rifle for about 3 months under heavy usage for indoor
skirmishing and so far I have not had one problem with it. I suppose the
foregrip can come loose if you continuesly hit the deck with it or if
you balance your weight on it, but then again, that will happen to it's
real life counter part as well. It's all comes down to taking care of
your rifle like you would in real combat situations.
I've modified the spring in the receiver by simply searching for a match in the local hobby stores and managed to get a better speed with an average of 280 fps using .20gram BB's (avg of 10 shots tested with a chronometer). The max accurate distance within a 2 inch radius is about 30 feet after that it loses felocity and accuracy which is the only draw back of this rifle.
I also suggest mounting the laser infront of the foregrip on the rail that way you have an even more accurate spot in a vertical line (at least it's lined up flush with your visor/marker). If you mount it this way your target will be about 3 inches above the laser dot instead of 4 inches to the right.
Another point worth mentioning is that you can get 2 2inch x 5mm screws with hex nuts to firmly affix the foregrip since it has 2 openings for that. Too bad that's not included in the package, but you can those for a few pennies at any good hardware store or hobby shop.
As an airsoft collector I am very satisfied with.
I've modified the spring in the receiver by simply searching for a match in the local hobby stores and managed to get a better speed with an average of 280 fps using .20gram BB's (avg of 10 shots tested with a chronometer). The max accurate distance within a 2 inch radius is about 30 feet after that it loses felocity and accuracy which is the only draw back of this rifle.
I also suggest mounting the laser infront of the foregrip on the rail that way you have an even more accurate spot in a vertical line (at least it's lined up flush with your visor/marker). If you mount it this way your target will be about 3 inches above the laser dot instead of 4 inches to the right.
Another point worth mentioning is that you can get 2 2inch x 5mm screws with hex nuts to firmly affix the foregrip since it has 2 openings for that. Too bad that's not included in the package, but you can those for a few pennies at any good hardware store or hobby shop.
As an airsoft collector I am very satisfied with.
by Red Green
First off, this gun is NOT automatic. Even though there is a deceptive
switch for, Semi and Automatic. If you're looking for an automatic one,
look else where.
Second, the instructions that come with it are laughable. A single piece of paper, one side has pictures of other types of guns (I'm assuming other products the company sells). The other, has the directions. But low and behold, the instructions aren't just for this gun. I could be mistaken though, since there is very little English and you must rely on the TINY pictures, and SMALL print to assemble.
The accessories are nice, though seemingly pointless, and the gun seems to be made from a hard plastic. Once you do figure it out, it is relatively easy to assemble and disassemble.
Second, the instructions that come with it are laughable. A single piece of paper, one side has pictures of other types of guns (I'm assuming other products the company sells). The other, has the directions. But low and behold, the instructions aren't just for this gun. I could be mistaken though, since there is very little English and you must rely on the TINY pictures, and SMALL print to assemble.
The accessories are nice, though seemingly pointless, and the gun seems to be made from a hard plastic. Once you do figure it out, it is relatively easy to assemble and disassemble.
By D Reh
Comments
Post a Comment